Ideal for converting your DLG into an F3K competition model.
Also for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g), or models requiring up to 85 watts of power.
Features
- Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g)
- High-torque, direct-drive alternative to inrunner brushless motors
- Ideal for models requiring up to 85 watts of power
- Integrated prop saver design
- Mount, prop adapter and hardware included
- External rotor design with 3.2mm shaft
- Low noise level
Needed To Complete
8A–10A Brushless ESC
6–8 Ni-Cd/Ni-MH or 2–3S Li-Po
6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer
Product Specifications
| Motor Design | Outrunner |
| Outer Diameter | 1.1 in (28mm) |
| Motor Type | Brushless |
| Connector Type | 2mm Bullet |
| Recommended Prop Range | 6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer |
| Bushing Or Bearing | Bearing |
| Resistance | .33 ohms |
| Shaft Diameter | 3.17mm (1/8 in) |
| Adjustable Timing | No |
| Voltage | 7.2–11.1V |
| Idle Current (Io) | .40A @ 8V |
| RPM/Volt (Kv) | 1380 |